Mike's Workshop Manuals: Service manuals for every vehicle
Home >> GMC >> 2011 >> Terrain SLT, 2.4 C, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 2.4L - DTC P0300 Through P1682 >> DTC P0627-P0629 >> Circuit/System Verification

Circuit/System Verification

  1. Attempt to start the engine. Observe the DTC information with a scan tool. DTC P0627, P0628, or P0629 should not set.
  2. Ignition ON, command the fuel pump ON and OFF with a scan tool while observing the following control circuit status parameters:
    • Fuel Pump Enable Circuit Low Voltage Test Status
    • Fuel Pump Enable Circuit Open Test Status
    • Fuel Pump Enable Circuit High Voltage Test Status

      Each parameter should toggle between OK and Not Run or Not Run and OK.

  3. Operate the vehicle within the Conditions for Running the DTC to verify the DTC does not reset. You may also operate the vehicle within the conditions that you observed from the Freeze Frame/Failure Records data.