Mike's Workshop Manuals: Service manuals for every vehicle
Home >> GMC >> 2011 >> Terrain SLT, 2.4 C, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls And Fuel - 2.4L - DTC P0010 Through P025A >> DTC P0010 or P0013 >> Component Testing

Component Testing

  1. Ignition OFF, disconnect the harness connector at the appropriate Q6 camshaft position actuator solenoid valve.
  2. Test for 8-13 Ω between the control terminal A and the low reference circuit terminal B of the Q6 camshaft position actuator solenoid valve.
    • If not within the specified range, replace the Q6 camshaft position actuator solenoid valve.
  3. Test for infinite resistance between each terminal and the Q6 camshaft position actuator solenoid valve housing.
    • If not the specified value, replace the Q6 camshaft position actuator solenoid valve.
scientia non olet · About Mike's Workshop Manuals