Liftgate Latch Replacement

Fig 1: Liftgate Latch

Courtesy of GENERAL MOTORS CORP.

Callout	Component Name
Preliminary Procedure: Remove the liftgate lower trim panel. Refer to Liftgate Lower Trim Finish Panel Replacement .
1	Liftgate Latch Screw (Qty: 3) CAUTION: Refer to Fastener Caution . Tighten: 9 N.m (80 lb in)
2	Liftgate Latch Assembly Procedure Disconnect the electrical connector. Remove the plastic tether before installing the liftgate latch. Calibrate the liftgate. Refer to Liftgate Calibration . Adjust the liftgate if needed. Refer to Liftgate Adjustment .

Callout

Component Name

Preliminary Procedure:
Remove the liftgate lower trim panel. Refer to Liftgate Lower Trim Finish Panel Replacement .

Liftgate Latch Screw (Qty: 3)

CAUTION: Refer to Fastener Caution .

Tighten: 9 N.m (80 lb in)

Liftgate Latch Assembly

Procedure