Mike's Workshop Manuals: Service manuals for every vehicle
Home >> GMC >> 2011 >> Canyon 4D Pickup, 2.9 9 >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Controls And Fuel - 2.9L - Repair Instructions >> Repair Instructions >> Camshaft Position Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: View Of CMP Sensor Connector, Exhaust Camshaft Actuator Connector & Engine Wiring Harness Retainer
    GM1350714Courtesy of GENERAL MOTORS CORP.
  1. Disconnect the engine wiring harness electrical connector (4) from the camshaft position (CMP) sensor (5).
    2. Fig 2: View Of CMP Sensor
    GM858172Courtesy of GENERAL MOTORS CORP.
  2. Remove the CMP sensor retaining bolt.
  3. Remove the CMP sensor from the cylinder head.

    Discard the O-ring seal.

scientia non olet · About Mike's Workshop Manuals