Mike's Workshop Manuals: Service manuals for every vehicle
Home >> GMC >> 2010 >> Yukon Hybrid, RWD >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System & Fuel System - Hybrid (LZ1) - Repair Instructions >> Repair Instructions >> Fuel Hose/Pipe Assembly Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Fuel Feed Line
    GM1704506Courtesy of GENERAL MOTORS CORP.
  1. Install the fuel feed line to the fuel tank.
  2. Remove the cap from the fuel feed port on the fuel tank module.
    3. Fig 2: View Of EVAP Line Clip & Retainer
    GM1704504Courtesy of GENERAL MOTORS CORP.
  3. Connect the fuel feed line quick connect fitting at the fuel tank module. Refer to Plastic Collar Quick Connect Fitting Service .
  4. Install the fuel feed line to the clip (1) and close the clip.
  5. Install the fuel feed line to the retaining feature (2) in the fuel tank.
  6. Install the fuel tank. Refer to Fuel Tank Replacement .
scientia non olet · About Mike's Workshop Manuals