Mike's Workshop Manuals: Service manuals for every vehicle
Home >> GMC >> 2010 >> Terrain SLE, 2.4 W, AWD >> Repair and Diagnosis >> Brakes >> Antilock Brake System With Traction Control System & Stability Control System >> Diagnostic Information and Procedures >> DTC C0161 >> Circuit/System Testing

Circuit/System Testing

  1. Ignition OFF, inspect the B22 Brake Pedal Position Sensor for correct installation.
    • If loose or incorrect installation is diagnosed, correct the installation of the component.
  2. Ignition ON, perform the Brake Pedal Position Sensor Calibration and verify the DTC does not reset.
    • If the DTC resets, replace the K17 Electronic Brake Control Module (EBCM).
scientia non olet · About Mike's Workshop Manuals