Mike's Workshop Manuals: Service manuals for every vehicle
Home >> GMC >> 2009 >> Canyon 2D Pickup, 5.3 L, 4WD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel System - 5.3L - Introduction, Service & Repair >> Repair Instructions >> Air Cleaner Assembly Replacement >> Removal Procedure

Removal Procedure

    Fig 1: MAF/IAT Sensor
    GM1897141Courtesy of GENERAL MOTORS CORP.
  1. Remove the air cleaner outlet duct. Refer to Air Cleaner Resonator Outlet Duct Replacement .
  2. Disconnect the engine wiring harness electrical connector (1) from the mass airflow (MAF)/intake air temperature (IAT) sensor.
    3. Fig 2: Integral Air Cleaner Housing & Bolts
    GM1899698Courtesy of GENERAL MOTORS CORP.
  3. Loosen the integral air cleaner housing bolts (2).
  4. Remove the air cleaner housing (1) from the vehicle.
scientia non olet · About Mike's Workshop Manuals