Mike's Workshop Manuals: Service manuals for every vehicle
Home >> GMC >> 2008 >> Yukon Base, 4.8 C >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Hybrid Engine Control System) >> Diagnostic Information and Procedures >> DTC P06AF >> Circuit/System Verification

Circuit/System Verification

WARNING: This page is about a different variant/trim than selected.
  1. Clear the DTC information.
  2. Turn the ignition OFF for 1 minute.
  3. Turn the ignition ON.
  4. Retest for DTC P06AF, ECM DTC P0606, or any communication DTCs.
scientia non olet · About Mike's Workshop Manuals