Mike's Workshop Manuals: Service manuals for every vehicle
Home >> GMC >> 2008 >> Acadia SLT, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel - 3.6L - Introduction (2 Of 2) >> Repair Instructions >> Manifold Absolute Pressure Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Identifying Manifold Absolute Pressure Sensor
    GM1858085Courtesy of GENERAL MOTORS CORP.
  1. Remove the fuel injector sight shield. Refer to FUEL INJECTOR SIGHT SHIELD REPLACEMENT .
  2. Disconnect the engine wiring harness electrical connector (1) from the manifold absolute pressure (MAP) sensor (2).
    3. Fig 2: View Of MAP Sensor Bolt & Sensor
    GM1858101Courtesy of GENERAL MOTORS CORP.
  3. Remove the MAP sensor bolt (1) and sensor (2).
scientia non olet · About Mike's Workshop Manuals