Mike's Workshop Manuals: Service manuals for every vehicle
Home >> GMC >> 2007 >> Sierra 1500, 4D Pickup, 5.3 M, Part Time >> Repair and Diagnosis >> Accessories & Equipment >> Collision/Avoidance >> Object Detection System >> Repair Instructions >> Rear Object Sensor Replacement >> Installation Procedure

Installation Procedure

    IMPORTANT: Do not refinish previously painted sensors. Excess paint build up will cause the sensor to be inoperative.
  1. Paint the rear object sensor. Refer to Basecoat/Clearcoat Paint Systems .
  2. Ensure the paint does not exceed 6 mils. Use a paint thickness gauge suitable for non-ferrous metals. Refer to Paint Gages .
    3. Fig 1: View Of Rear Object Sensor
    GM1699865Courtesy of GENERAL MOTORS CORP.
  3. Insert the sensor into the housing.
  4. Connect the electrical connector to the rear object sensor.
scientia non olet · About Mike's Workshop Manuals