Removal Procedure
WARNING: This page is about a different car, the 2007 Cadillac XLR. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the instrument panel (I/P) trim pad. Refer to Instrument Panel Trim Pad Replacement .
- Remove 2 plastic rivet retainers which secure the global positioning system (GPS) antenna to the I/P carrier.
- Remove the radio. Refer to Radio Replacement .
- Remove the GPS antenna from the retaining clip at the rear of the radio.
- Remove the GPS antenna loop lead from the HVAC duct work.
- Route the GPS antenna with the coaxial antenna lead from the I/P carrier.