Mike's Workshop Manuals: Service manuals for every vehicle
Home >> GMC >> 2007 >> Acadia SLT, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 32 (Wiper System & Washer System) >> Repair Instructions >> Washer Solvent Container Level Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2005 Pontiac G6. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Washer Solvent Container Level Sensor Electrical Connector
    GM1207514Courtesy of GENERAL MOTORS CORP.
  1. Position the level sensor seal (3) to the washer solvent container (1), pressing in until fully seated.
  2. Position the washer solvent level sensor (4) to the washer solvent container (1), pressing in until fully seated.
  3. Connect the washer solvent level sensor electrical connector.
  4. Install the left front fender liner. Refer to Front Fender Liner Replacement in Body Front End.
  5. Fill the washer solvent container with washer solvent.
scientia non olet · About Mike's Workshop Manuals