Mike's Workshop Manuals: Service manuals for every vehicle
Home >> GMC >> 2007 >> Acadia SLT, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 196 (Battery, Charging System And Starting System) >> Repair Instructions >> Battery Current Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Cadillac SRX. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Battery Current Sensor
    GM1475086Courtesy of GENERAL MOTORS CORP.
  1. Remove the negative battery cable. Refer to Battery Negative Cable Replacement (LY7 - LHD)  or Battery Negative Cable Replacement (LY7 - RHD)  or Battery Negative Cable Replacement (LH2 - LHD)  or Battery Negative Cable Replacement (LH2 - RHD) .
  2. Cut the tie straps and electrical tape attaching the battery current sensor to the battery cable.
  3. Squeeze the negative battery cable branches together.
    4. IMPORTANT: Note the position of the battery current sensor prior to removal.
  4. Slide the battery current sensor (1) off of the negative battery cable.
scientia non olet · About Mike's Workshop Manuals