Mike's Workshop Manuals: Service manuals for every vehicle
Home >> GMC >> 2007 >> Acadia SLT, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 114 (Antilock Brake System, Traction Control System & Stability Control System) >> Repair Instructions >> Brake Pressure Modulator Valve Bracket Replacement (CTS-V) >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2007 Cadillac CTS. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: To prevent equipment damage, never connect or disconnect the wiring harness connection from the EBCM with the ignition switch in the ON position.
  1. Turn OFF the ignition.
    2. Fig 1: Removing & Installing Brake Pressure Modulator Valve
    GM1351322Courtesy of GENERAL MOTORS CORP.
  2. Remove the brake pressure modulator valve (BPMV) from the frame. Refer to Brake Pressure Modulator Valve Replacement (CTS)  or Brake Pressure Modulator Valve Replacement (CTS-V) .
  3. Raise and support the vehicle. Refer to Lifting and Jacking the Vehicle .
  4. Remove the 4 BPMV bracket to frame mounting bolts (2).
  5. Remove the BPMV mounting bracket (1) from the frame.
scientia non olet · About Mike's Workshop Manuals