Mike's Workshop Manuals: Service manuals for every vehicle
Home >> GMC >> 2007 >> Acadia SLT, AWD >> Repair and Diagnosis >> Engine Performance >> System >> Engine Control System & Fuel - 3.6L (Ly7) - Introduction (2 Of 2) >> Repair Instructions >> Accelerator Pedal Position Sensor Replacement >> Removal Procedure

Removal Procedure

    Fig 1: Identifying Accelerator Pedal Position Sensor Assembly
    GM1858231Courtesy of GENERAL MOTORS CORP.
  1. Remove the left instrument panel insulator. Refer to Instrument Panel Insulator Panel Replacement - Left Side .
  2. Remove the instrument panel wiring harness electrical connector (2) from the accelerator pedal position (APP) sensor assembly.
    Fig 2: View Of APP Sensor Bolts And Sensor
    GM1858232Courtesy of GENERAL MOTORS CORP.
    IMPORTANT: Due to clearance issues, the upper attachment bolt cannot be removed from the APP sensor assembly. Loosen the bolt completely and leave the bolt in the component until the assembly is removed from the vehicle.
  3. Remove the APP sensor bolts and sensor assembly from the vehicle.
scientia non olet · About Mike's Workshop Manuals