Mike's Workshop Manuals: Service manuals for every vehicle
Home >> GMC >> 2007 >> Acadia SLE, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 432 (Power Seat System) >> Repair Instructions >> Lumbar Switch Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2007 Cadillac XLR. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: View Of Lumbar Switch & Electrical Connector
    GM1248787Courtesy of GENERAL MOTORS CORP.
  1. Connect the electrical connector to the lumbar switch.
    2. Fig 2: View Of Finish Panel Bottom
    GM1247980Courtesy of GENERAL MOTORS CORP.
  2. Install the lumbar switch to the finish panel. Press until the switch snaps into place.
  3. Install the finish panel. Refer to Finish Panel Replacement - Driver Seat Outer .
scientia non olet · About Mike's Workshop Manuals