Mike's Workshop Manuals: Service manuals for every vehicle
Home >> GMC >> 2005 >> Jimmy Part Time, Standard >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - (Introduction) >> Repair Instructions >> Evaporative Emission (EVAP) Hoses/Pipes Replacement - Engine/Chassis >> Removal Procedure

Removal Procedure

    Fig 1: Locating Fuel Pipes
    GM331785Courtesy of GENERAL MOTORS CORP.
  1. Relieve the fuel system pressure. Refer to Fuel Pressure Relief Procedure .
  2. Disconnect the chassis evaporative emission (EVAP), fuel feed, and return pipes (1) at the engine compartment EVAP, fuel feed, and return pipes.
  3. Remove the transmission. Refer to Transmission Replacement in Manual Transmission - NV 3500.
  4. Remove the EVAP/fuel pipe retainer clip (2) from the left cylinder head.
    5. Fig 2: Locating Fuel Filter & Fuel Lines
    GM255018Courtesy of GENERAL MOTORS CORP.
  5. Disconnect the EVAP pipe (1).
  6. Remove the EVAP pipe from the retainers.
scientia non olet · About Mike's Workshop Manuals