Mike's Workshop Manuals: Service manuals for every vehicle
Home >> GMC >> 2005 >> Jimmy Part Time, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting Systems >> Repair Instructions >> Stop Lamp Switch Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Stop Lamp Switch Electrical Connector
    GM883Courtesy of GENERAL MOTORS CORP.
  1. Install the electrical connector to the stop lamp switch.
    2. Fig 2: View Of Stop Lamp Switch
    GM344886Courtesy of GENERAL MOTORS CORP.
  2. Install the stop lamp switch and the pushrod to the brake pedal pin.
    3. Fig 3: View Of Pushrod Retainer At Brake Pedal Pin
    GM344875Courtesy of GENERAL MOTORS CORP.
  3. Install the pushrod retainer on the brake pedal pin. The retainer will snap into place.
scientia non olet · About Mike's Workshop Manuals