Removal Procedure

NOTE: Do not remove the C-clip from the cruise control connector. The C-clip was not designed for removal. Damage may occur when removing.

IMPORTANT: The cruise control cable does not require mechanical adjusting after the replacement. The cruise control module internally adjusts the cable. Refer to Cruise Control Description and Operation for the complete operational details.

Fig 1: View Of Cruise Control Connector C-Clip

GM567860

Courtesy of GENERAL MOTORS CORP.

Open the hood.

Fig 2: Identifying Cruise Control Cable Adjuster Screw

GM567851

Courtesy of GENERAL MOTORS CORP.

Do not remove the adjuster screw from the end of the cruise control cable. No adjustment will be needed.

Fig 3: Twisting Cruise Control Cable Connector Screw End Clockwise Or Counterclockwise To Specifications

GM580244

Courtesy of GENERAL MOTORS CORP.

Remove the cruise control cable from the throttle linkage.
Use a suitable tool to lightly pry off the end of the cruise control cable from the stud on the throttle lever.

Fig 4: View Of Cruise Control Cable At Round Hole In Engine Cable Bracket

GM580230

Courtesy of GENERAL MOTORS CORP.

Disconnect the cruise control cable from the round hole in the engine cable bracket.

Fig 5: View Of Cruise Control Cable Locator Clip At Rectangular Hole In Routing Bracket

GM597198

Courtesy of GENERAL MOTORS CORP.

Disconnect the cruise control cable locator clip from the rectangular hole in the routing bracket.

Fig 6: View Of Cruise Control Cable At Cruise Control Module Housing

GM597101

Courtesy of GENERAL MOTORS CORP.

Remove the cruise control cable from the cruise control module housing.

IMPORTANT: Do not allow the cruise control ribbon (1) to retract into the module assembly.

Disconnect the cruise control cable bead (2) from the end of the ribbon (1).
Remove the cruise control cable from the vehicle.