Mike's Workshop Manuals: Service manuals for every vehicle
Home >> GMC >> 2005 >> Jimmy Part Time, Automatic >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Power Steering Pump Flow Control Valve Replacement - Off Vehicle (CB Series) >> Disassembly Procedure

Disassembly Procedure

    Fig 1: Removing O-Ring Seal, Connector & Fitting Assembly
    GM448006Courtesy of GENERAL MOTORS CORP.
  1. Remove the connector and fitting assembly (4).
  2. Remove the O-ring seal (3).
    3. Fig 2: Removing Control Valve Assembly & Flow Control Spring
    GM448001Courtesy of GENERAL MOTORS CORP.
  3. Remove the control valve assembly (3) and the flow control spring (2) from the pump housing assembly (1).
scientia non olet · About Mike's Workshop Manuals