Mike's Workshop Manuals: Service manuals for every vehicle
Home >> GMC >> 2004 >> Sierra 2500, 4D Pickup, 4WD, Part Time >> Repair and Diagnosis >> Engine Performance >> System >> Engine Controls - 4.8L, 5.3L, & 6.0L (Introduction) >> Repair Instructions >> Throttle Actuator Control (TAC) Module Replacement >> Removal Procedure

Removal Procedure

  1. Disconnect the instrument panel (I/P) harness electrical connector (2).
    2. Fig 1: I/P Wiring Harness Electrical Connector
    GM858196Courtesy of GENERAL MOTORS CORP.
  2. Release the red connector position assurance (CPA) retainer.
  3. Disconnect the engine wiring harness electrical connector (1).
    4. Fig 2: View Of TAC Module Electrical Connector
    GM871922Courtesy of GENERAL MOTORS CORP.
  4. Remove the throttle actuator control (TAC) module nuts.
    5. Fig 3: Throttle Actuator Control (TAC) Module Nuts
    GM855736Courtesy of GENERAL MOTORS CORP.
  5. Remove the TAC module.
scientia non olet · About Mike's Workshop Manuals