Mike's Workshop Manuals: Service manuals for every vehicle
Home >> GMC >> 2004 >> Sierra 2500, 4D Pickup, 4WD, Part Time >> Repair and Diagnosis >> Engine Mechanical >> Power Takeoff >> Power Take-Off System >> Repair Instructions >> Power Take-Off (PTO) Switch Replacement >> Installation Procedure

Installation Procedure

  1. Install the PTO switch to the housing
  2. Connect the wire connector to the switch.
  3. Install the switch housing to the I/P till it clicks into place.
    4. Fig 1: I/P Switch Housing
    GM884837Courtesy of GENERAL MOTORS CORP.
  4. Install the I/P cluster bezel. Refer to Bezel Replacement - Instrument Panel (I/P) Cluster in Instrument Panel, Gages, and Console.
scientia non olet · About Mike's Workshop Manuals