Mike's Workshop Manuals: Service manuals for every vehicle
Home >> GMC >> 2004 >> Sierra 2500, 4D Pickup, 4WD, Part Time >> Repair and Diagnosis >> Body & Frame >> Windows >> Door System, Mirror System & Window System >> Repair Instructions >> Module Replacement - Front Power Window >> Installation Procedure

Installation Procedure

  1. Install the regulator to the door.
    2. NOTE: Refer to Fastener Notice in Cautions and Notices.
  2. Install the bolts to the window regulator.

    Tighten:  Tighten the bolts to 9 N.m (80 lb in).

    3. Fig 1: Installing Window Regulator Bolts
    GM348453Courtesy of GENERAL MOTORS CORP.
  3. Align the window to the regulator and install the bolts holding the window to the regulator.

    Tighten:  Tighten the bolts to 9 N.m (80 lb in).

  4. Connect the wiring harness to the window motor assembly.
  5. Install the water deflector. Refer to Water Deflector Replacement - Front Door .
  6. Install the trim panel. Refer to Trim Panel Replacement - Side Front Door (With YE9 Early Production)  or Trim Panel Replacement - Side Front Door (With YE9 Late Production) .
  7. Lower the window. Inspect the window operation.
scientia non olet · About Mike's Workshop Manuals