Mike's Workshop Manuals: Service manuals for every vehicle
Home >> GMC >> 2004 >> Jimmy 2D Utility, Part Time, Standard >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Steering Gear Housing End Plug Replacement - Off Vehicle >> Disassembly Procedure

Disassembly Procedure

    Fig 1: View Of Steering Gear Housing End Plug Assembly
    GM322010Courtesy of GENERAL MOTORS CORP.
  1. Rotate the stub shaft back and forth to drain the fluid.
  2. Insert a punch into the housing access hole to unseat the retaining ring (1).
  3. Remove the plug (2).
  4. Remove the O-ring seal (3).
scientia non olet · About Mike's Workshop Manuals