Mike's Workshop Manuals: Service manuals for every vehicle
Home >> GMC >> 2004 >> Jimmy 2D Utility, Part Time, Standard >> Repair and Diagnosis >> Body & Frame >> Seats >> Seat System >> Repair Instructions >> Seat Switch Replacement - Power >> Removal Procedure

Removal Procedure

  1. Remove the seat from the vehicle. Refer to Seat Replacement - Bucket  or Seat Replacement - Bench .
    2. Fig 1: View Of Trim Panel
    GM544184Courtesy of GENERAL MOTORS CORP.
  2. Remove the 3 screws securing the trim panel to the seat.
    3. Fig 2: View Of Lumbar Switch Electrical Connector
    GM609140Courtesy of GENERAL MOTORS CORP.
  3. Disconnect the electrical connector from the switch.
    4. Fig 3: View Of Switch Assembly
    GM609142Courtesy of GENERAL MOTORS CORP.
  4. Remove the switch from the trim panel by snapping the switch out of the plastic retaining tabs.
  5. Remove the switch assembly.
scientia non olet · About Mike's Workshop Manuals