Mike's Workshop Manuals: Service manuals for every vehicle
Home >> GMC >> 2004 >> Jimmy 2D Utility, Part Time, Automatic >> Repair and Diagnosis >> Drivelines & Axles >> Differentials & Drive Axles >> Front Drive Axle >> Repair Instructions >> Four-Wheel Drive Indicator Switch Replacement >> Installation Procedure

Installation Procedure

    Fig 1: View Of Four-Wheel Drive Indicator Switch
    GM724053Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the four-wheel drive indicator switch.

    Tighten:  Tighten the four-wheel drive indicator switch to 5 N.m (44 lb in).

    2. Fig 2: View Of Four-Wheel Drive Indicator Switch Electrical Harness
    GM724052Courtesy of GENERAL MOTORS CORP.
  2. Install the electrical harness from the four-wheel drive indicator switch.
  3. Install the front differential carrier shield, if equipped. Refer to Shield Replacement .
  4. Lower the vehicle.
scientia non olet · About Mike's Workshop Manuals