Mike's Workshop Manuals: Service manuals for every vehicle
Home >> GMC >> 2003 >> Jimmy 2D Utility, Part Time, Standard >> Repair and Diagnosis >> Steering >> Power Steering System >> Repair Instructions >> Power Steering Pump Flow Control Valve Replacement - Off Vehicle (CB Series) >> Disassembly Procedure

Disassembly Procedure

  1. Remove the connector and fitting assembly (4).
  2. Remove the O-ring seal (3).
    Fig 1: Connector & O-Ring Seal
    G01467173Courtesy of GENERAL MOTORS CORP.
  3. Remove the control valve assembly (3) and the flow control spring (2) from the pump housing assembly (1).
Fig 2: Removing Control Valve Assembly & Flow Control Spring From Pump Housing Assembly
G01467174Courtesy of GENERAL MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals