Mike's Workshop Manuals: Service manuals for every vehicle
Home >> GMC >> 2003 >> Jimmy 2D Utility, Part Time, Standard >> Repair and Diagnosis >> Accessories & Equipment >> Headlights >> Lighting Systems >> Repair Instructions >> Stop Lamp Switch Replacement >> Installation Procedure

Installation Procedure

  1. Install the electrical connector to the stop lamp switch.
    Fig 1: Installing Electrical Connector To Stop Lamp Switch
    G01476268Courtesy of GENERAL MOTORS CORP.
  2. Install the stop lamp switch and the pushrod to the brake pedal pin.
    Fig 2: Installing Stop Lamp Switch & Pushrod To Brake Pedal Pin
    G01476269Courtesy of GENERAL MOTORS CORP.
  3. Install the pushrod retainer on the brake pedal pin. The retainer will snap into place.
    Fig 3: Installing Pushrod Retainer On Brake Pedal Pin
    G01476270Courtesy of GENERAL MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals