Mike's Workshop Manuals: Service manuals for every vehicle
Home >> GMC >> 2003 >> Jimmy 2D Utility, Part Time, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Engine Exhaust System >> Repair Instructions >> Exhaust Seal Replacement >> Installation Procedure

Installation Procedure

  1. Install the exhaust manifold pipe and NEW seal to the exhaust manifold.
    NOTE: Refer to FASTENER NOTICE in Cautions and Notices.
  2. Install the exhaust manifold pipe to manifold flange bolts.

    Tighten 

    Tighten the exhaust manifold pipe to manifold flange bolts to 30 N.m (22 lb ft).

  3. Lower the vehicle.
    Fig 1: Installing Exhaust Manifold Pipe And New Seal To Exhaust Manifold
    G01979415Courtesy of GENERAL MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals