Mike's Workshop Manuals: Service manuals for every vehicle
Home >> GMC >> 2002 >> Jimmy 2D Utility, Part Time, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 446 (Engine Controls - Removal & Installation) >> Fuel Systems >> Fuel Tank >> Disassembly

Fuel Tank: Disassembly

WARNING: This page is about a different car, the 2003 Oldsmobile Bravada, 2003 GMC Envoy XL, 2003 GMC Envoy, and 2003 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the EVAP vent valve (1). See EVAP CANISTER VENT VALVE  under MOTORS, RELAYS & SOLENOIDS. See Figure.
  2. Remove the fuel filter (8). See FUEL FILTER .
  3. Disconnect the fuel feed and return pipes from the fuel sender (5). See FUEL LINE DISCONNECT FITTINGS (5.3L) .
  4. Remove the fuel feed and return pipes from the retaining clip (7).
  5. Remove the EVAP vent valve pipe.
  6. Disconnect the EVAP vapor pipe from the fill limiter vent valve (4), and the front and rear rollover valves (2, 6). See FUEL LINE DISCONNECT FITTINGS (5.3L) .
  7. Remove the EVAP vapor pipes.
  8. Remove the fuel sender assembly (5) from the fuel tank. See FUEL PUMP .
  9. Remove the EVAP canister (3). See EVAP CANISTER .
scientia non olet · About Mike's Workshop Manuals