Mike's Workshop Manuals: Service manuals for every vehicle
Home >> GMC >> 2002 >> Jimmy 2D Utility, Part Time, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1664 (Wiper System & Washer System) >> Repair Instructions >> Windshield Outside Moisture Sensor Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
IMPORTANT: The rain sensor retaining ring is permanently mounted to the windshield and is not serviceable. Damage to the windshield or the retaining ring will occur if removed.
  1. Disconnect the electrical connector from the rain sensor (1).
    Fig 1: Rain Sensor & Retaining Ring
    GM756193Courtesy of GENERAL MOTORS CORP.
  2. Carefully pull downward on sensor (1) to release it from the retaining ring (2).
    IMPORTANT: Do not touch the surface of the sensor when it is removed from the glass.
  3. Remove the sensor from the vehicle.
scientia non olet · About Mike's Workshop Manuals