Mike's Workshop Manuals: Service manuals for every vehicle
Home >> GMC >> 2002 >> Jimmy 2D Utility, Part Time, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1660 (Lighting Systems) >> Repair Instructions >> Tail Lamp Bulb Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the tail lamp bulb to the tail lamp circuit board.
    Fig 1: Tail Lamp Bulb
    GM743393Courtesy of GENERAL MOTORS CORP.
  2. Ensure the bulbs are wiped clean and free of any oil or dirt.
  3. Install the tail lamp to the vehicle. Refer to Tail Lamp Replacement .
  4. Check the bulbs for proper operation.
scientia non olet · About Mike's Workshop Manuals