Mike's Workshop Manuals: Service manuals for every vehicle
Home >> GMC >> 2002 >> Jimmy 2D Utility, Part Time, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1660 (Lighting Systems) >> Repair Instructions >> High Beam Relay Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Open and support the hood.
  2. Remove the protective covers from the underhood fuse block.
  3. Use the J 43244  in order to remove the high beam relay (1) from the underhood fuse block.
    Fig 1: Locating High Beam Relay In Underhood Fuse Block
    GM739854Courtesy of GENERAL MOTORS CORP.