Mike's Workshop Manuals: Service manuals for every vehicle
Home >> GMC >> 2002 >> Jimmy 2D Utility, Part Time, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1419 (Engine Control System - 4.8L, 5.3L, & 6.0L - Introduction) >> Repair Instructions >> Fuel Tank Pressure Sensor Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 GMC Envoy XUV, 2004 GMC Envoy XL, 2004 Chevrolet TrailBlazer, and 2004 Buick Rainier. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Disconnecting/Connecting Fuel Tank Pressure Sensor Electrical Connector
    GM899743Courtesy of GENERAL MOTORS CORP.
  1. Install the fuel tank pressure sensor.
  2. Close the retaining clip.
  3. Connect the fuel tank pressure sensor electrical connector (3).
  4. Lower the vehicle.