Mike's Workshop Manuals: Service manuals for every vehicle
Home >> GMC >> 2002 >> Jimmy 2D Utility, Part Time, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1344 (Body Front End) >> Repair Instructions >> Support Replacement - Center >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Hood Latch Bolts
    GM239366Courtesy of GENERAL MOTORS CORP.
    NOTE: Refer to Fastener Notice in Cautions and Notices.
  1. Install the center support (2) to the vehicle. Secure the support with the 2 bolts.

    Tighten:  Tighten the center support bolts to 15 N.m (11 lb ft).

    2. Fig 2: Air Temperature Sensor And Center Support Connector
    GM431893Courtesy of GENERAL MOTORS CORP.
  2. Install the input air temperature sensor (2) connector to the center support (1).
  3. Install the hood secondary catch and primary latch. Refer to Hood Latch Replacement  .
  4. Install the upper fascia plastic retainer to the top of the center support.
scientia non olet · About Mike's Workshop Manuals