Mike's Workshop Manuals: Service manuals for every vehicle
Home >> GMC >> 2002 >> Jimmy 2D Utility, Part Time, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1344 (Body Front End) >> Repair Instructions >> Hood Hold-Open Rod Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Hood Hold-Open Rod, Retaining Clip And Grommet
    GM869704Courtesy of GENERAL MOTORS CORP.
  1. Install the hold-open rod (1) to the grommet (2).
  2. Push in and rotate the rod (1) 90 degrees clockwise.
  3. Install the hold-open rod (1) into the retaining clip (3).
  4. Lower the hood.
scientia non olet · About Mike's Workshop Manuals