Mike's Workshop Manuals: Service manuals for every vehicle
Home >> GMC >> 2002 >> Jimmy 2D Utility, Part Time, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 1302 (Lighting Systems) >> Repair Instructions >> Backup Lamp Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the backup lamp electrical connector.
  2. Remove the rear bumper fascia. Refer to FASCIA REPLACEMENT - REAR BUMPER .
  3. Remove the 1 bolt that retains the backup (2) lamp to the rear fascia (1).
  4. Remove the backup lamp socket if required, by turning counter clockwise.
  5. Remove the back up lamp (2) from the rear bumper fascia (1).
    Fig 1: Removing Backup Lamp
    G01433486Courtesy of GENERAL MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals