Mike's Workshop Manuals: Service manuals for every vehicle
Home >> GMC >> 2002 >> Jimmy 2D Utility, Part Time, Standard >> Repair and Diagnosis >> Body & Frame >> Seats >> Power Seat System >> Repair Instructions >> Seat Switch Replacement - Power >> Installation Procedure

Installation Procedure

  1. Install the switch assembly to the trim panel by snapping the switch into the plastic retaining clips.
    Fig 1: Locating Power Seat Switch Assembly
    G01843096Courtesy of GENERAL MOTORS CORP.
  2. Connect the electrical connector to the switch.
    Fig 2: Locating Power Seat Switch Electrical Connector
    G01843097Courtesy of GENERAL MOTORS CORP.
  3. Install the trim panel to the seat with the 3 screws.
  4. Install the seat to the vehicle. Refer to SEAT REPLACEMENT - BUCKET  or SEAT REPLACEMENT - BENCH .
    Fig 3: Locating Trim Plate
    G01843098Courtesy of GENERAL MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals