Mike's Workshop Manuals: Service manuals for every vehicle
Home >> GMC >> 2002 >> Jimmy 2D Utility, Part Time, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1574 (Power Seat System) >> Repair Instructions >> Lumbar Switch Replacement - Front >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2002 Oldsmobile Bravada, 2002 GMC Envoy XL, 2002 GMC Envoy, and 2002 Chevrolet TrailBlazer. However, it is still accessible from the selected car via links, so may be relevant.
  1. Connect the electrical connector to the lumbar switch.
    Fig 1: View Of Bulkhead Connector
    GM752953Courtesy of GENERAL MOTORS CORP.
  2. Install the lumbar switch to the switch bezel assembly, verifying that the retaining tabs are fully seated.
  3. Install the power seat switch. Refer to Seat Switch Replacement - Power .
  4. Install the switch bezel assembly to the seat. Refer to Seat Switch Bezel Replacement .
scientia non olet · About Mike's Workshop Manuals