Mike's Workshop Manuals: Service manuals for every vehicle
Home >> GMC >> 2002 >> Jimmy 2D Utility, Part Time, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1339 (Door System, Mirror System & Window System) >> Repair Instructions >> Power Mirror Switch Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Power Mirror Switch And I/P Accessory Trim Plate
    GM843804Courtesy of GENERAL MOTORS CORP.
  1. Remove the left I/P accessory trim plate. Refer to Trim Plate Replacement - Instrument Panel (I/P) Accessory Left in Instrument Panel, Gages and Console.
  2. Disconnect the electrical connectors.
  3. Using a taped flat-bladed tool, gently pry and release the 4 clips around the lamp dimmer switch/remote control rearview mirror switch trim plate (2).
  4. Using a taped flat bladed tool, gently pry and release the clips around the power mirror switch (1).
scientia non olet · About Mike's Workshop Manuals