Mike's Workshop Manuals: Service manuals for every vehicle
Home >> GMC >> 2002 >> Jimmy 2D Utility, Part Time, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1339 (Door System, Mirror System & Window System) >> Repair Instructions >> Power Accessory Switch Panel Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2004 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
    Fig 1: Removing Accessory Switch Mounting Plate
    GM1510512Courtesy of GENERAL MOTORS CORP.
  1. Using a taped flat bladed tool, gently pry up on the front of the side door accessory switch mounting plate (1), and slide forward from the front side door trim (2).
    2. Fig 2: Window/Lock Switch Electrical Connector
    GM626677Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the front side door window/lock switch electrical connector (2).
    3. Fig 3: Window/Lock Switch Components
    GM626687Courtesy of GENERAL MOTORS CORP.
  3. Remove the following components from the front side door window/lock switch (3):
    • The 3 screws (1)
    • The front side door accessory switch mounting plate (2)
scientia non olet · About Mike's Workshop Manuals