Mike's Workshop Manuals: Service manuals for every vehicle
Home >> GMC >> 2002 >> Jimmy 2D Utility, Part Time, Automatic >> Repair and Diagnosis >> External Pages >> Different car >> Section 1313 (Door System, Mirror System & Window System) >> Repair Instructions >> Power Accessory Switch Panel Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2003 Pontiac Vibe. However, it is still accessible from the selected car via links, so may be relevant.
  1. Using a taped flat bladed tool, gently pry the front side door accessory switch mounting plate (1) from the front side door trim (2).
    Fig 1: Prying Front Side Door Accessory Switch Mounting Plate From Front Side Door Trim
    G01434623Courtesy of GENERAL MOTORS CORP.
  2. Disconnect the front side door window/lock switch electrical connector (2).
    Fig 2: Disconnecting Front Side Door Window/Lock Switch Electrical Connector
    G01434624Courtesy of GENERAL MOTORS CORP.
  3. Remove the following components from the front side door window/lock switch (3):
    • The 3 screws (1)
    • The front side door accessory switch mounting plate (2)
Fig 3: Removing Front Side Door Accessory Switch Mounting Plate From Front Side Door Window/Lock Switch
G01434625Courtesy of GENERAL MOTORS CORP.
scientia non olet · About Mike's Workshop Manuals