Mike's Workshop Manuals: Service manuals for every vehicle
Home >> GMC >> 2000 >> Yukon Base, 5.3 T, RWD >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 8 (Body Control Modules - Old Style) >> Diagnostic Tests >> DTC 41: Last Transmitter Message Received Valid >> Testing

DTC 41: Last Transmitter Message Received Valid: Testing

WARNING: This page is about a different variant/trim than selected.
  1. Reprogram Remote Keyless Entry (RKE) transmitter. See REMOTE KEYLESS ENTRY (RKE) TRANSMITTER  under PROGRAMMING. Attempt to perform all functions controlled by RKE transmitter. If RKE transmitter controls all functions, repair is complete. If RKE transmitter does not control all functions, go to next step.
  2. Program a known-good RKE transmitter. Attempt to perform all functions controlled by RKE transmitter. If RKE transmitter controls all functions, repair is complete. If RKE transmitter does not control all functions, go to next step.
  3. Replace Body Control Module (BCM). See BODY CONTROL MODULE (BCM)  under REMOVAL & INSTALLATION. Reprogram RKE transmitter(s). Retest operation.
scientia non olet · About Mike's Workshop Manuals