Mike's Workshop Manuals: Service manuals for every vehicle
Home >> GMC >> 1997 >> Forward Control 6.5 F >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (Engine Controls - System & Component Testing - 6.5L Turbo Diesel) >> Miscellaneous Pcm/VCM Controls >> Transmission >> Converter Lock-Up Signal From PCM/VCM

Converter Lock-Up Signal From PCM/VCM

WARNING: This page is about a different car, the 1998 GMC Forward Control and 1998 Chevrolet Forward Control. However, it is still accessible from the selected car via links, so may be relevant.
  1. Warm engine to operating temperature. Raise vehicle and support drive wheels. Support suspension where necessary to prevent damage to drive axles.
  2. Connect a test light to battery voltage. Touch TCC control driver terminal with test light. Accelerate vehicle to 45 MPH and note test light. If test light does not illuminate, problem is a faulty PCM/VCM connector or PCM/VCM.
scientia non olet · About Mike's Workshop Manuals