Code P0133, Heated Oxygen Sensor Slow Response: Notes
WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 1996 Chevrolet Chevy Van, 1995 GMC Vandura Special, 1995 GMC Vandura, 1995 GMC Sonoma, and 1995 GMC Safari. However, it is still accessible from the selected car via links, so may be relevant.
"S" & "T" SERIES 4.3L (VIN W) BANK 1, SENSOR 1
Control module supplies and monitors a voltage of about .45 volt between control module HO2S low reference circuit and HO2S signal circuit. If read with a 10-megohm DVOM, voltage may read as low as .32 volt. HO2S varies voltage within a range of about 1.0 volt (rich) to .10 volt (lean). Sensor is like an open circuit and produces no voltage when less than about 600°F (360°C). Open loop operation is caused by Codes P0131, P0132, or an open or cold sensor. Code P0132 will cause system to operate in open loop. Control module will illuminate Malfunction Indicator Light (MIL).
NOTE:
Test numbers refer to numbers on diagnostic chart.
- Checks for other codes.
- Checks for physical damage to engine components and converter.
- Checks fuel injector and isolates sensor.