Code 68, Overdrive Ratio Error - 4L80-E Transmission: Notes

WARNING: This page does not describe the selected car, but rather 19 other vehicles, including the 1996 Chevrolet Chevy Van, 1995 GMC Vandura Special, 1995 GMC Vandura, 1995 GMC Sonoma, and 1995 GMC Safari. However, it is still accessible from the selected car via links, so may be relevant.

Control module monitors the difference in engine RPM and input shaft RPM. With transmission in Drive, scan tester reading should show engine speed closely matching input speed.

NOTE: Test numbers refer to numbers on diagnostic chart.

Checks indicated range signal to selected range. A faulty switch could set this code.
Checks TCC for slippage while in a commanded lock-up state.