Inactive DTC Condition

WARNING: This page is about a different car, the 1995 Dodge Pickup and 1995 Dodge Cab & Chassis. However, it is still accessible from the selected car via links, so may be relevant.

This procedure applies if you have been sent here from diagnostic tests and have just attempted to simulate condition that initially set fault message. Following additional checks may assist in identifying a possible intermittent problem:

Visually inspect related wiring harness connectors for broken, bent, pushed-out or corroded terminals.
Visually inspect related wiring harnesses for chafed, pierced or partially broken wires.
Check all pertinent Technical Service Bulletins (TSBs).