Mike's Workshop Manuals: Service manuals for every vehicle
Home >> GMC >> 1995 >> Forward Control 7.4 N >> Repair and Diagnosis >> External Pages >> Different car >> Section 126 (Engine Controls - Remove/Install/Overhaul - 5.0L) >> Oxygen Sensor >> Engine Controls - Remove/Install/Overhaul - 5.0L >> Installation

Engine Controls - Remove/Install/Overhaul - 5.0L: Installation

WARNING: This page does not describe the selected car, but rather 8 other vehicles, including the 1995 GMC Vandura, 1995 GMC Rally, 1995 GMC Pickup, 1995 Chevrolet Sportvan, and 1995 Chevrolet Pickup. However, it is still accessible from the selected car via links, so may be relevant.
  1. Whenever oxygen sensor is removed, coat threads with anti-seize compound before reinstalling. New oxygen sensors already have this compound applied to threads.
  2. Install oxygen sensor in exhaust pipe and tighten sensor to 30 ft. lbs. (41 N.m). Reconnect electrical connector to oxygen sensor. Reconnect negative battery cable.
scientia non olet · About Mike's Workshop Manuals