Mike's Workshop Manuals: Service manuals for every vehicle
Home >> GMC >> 1991 >> Forward Control 6.2 J, Automatic >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> General Servicing >> A/C Compressor Oil Checking >> Servicing Precautions >> Placing System In Operation

Placing System In Operation

After component service or replacement has been completed and all connections have been made, evacuate system thoroughly with an evacuation (vacuum) pump. Charge system with proper amount of refrigerant and perform a leak test. See A/C SYSTEM SPECIFICATIONS article in the AIR CONDITIONING & HEAT section. After system has been leak tested, check system operation.

NOTE: Air conditioning systems will not normally need additional refrigerant oil unless definite oil loss has occurred due to ruptured lines, leaking compressor seals, compressor overhaul or component replacement
scientia non olet · About Mike's Workshop Manuals