Mike's Workshop Manuals: Service manuals for every vehicle
Home >> GMC >> 1987 >> Forward Control 7.4 W, Standard >> Repair and Diagnosis >> Transmission >> Manual Trans >> Servicing - M/T >> Adjustments >> Shift Linkage >> All With Column Shifter

All With Column Shifter

  1. Remove shift rods from transmission. Place First and Reverse gear selector lever on transmission in Reverse position. Move second and third transmission shift lever to forward detent, then back one.
  2. Place column shifter in Reverse position. Turn ignition switch to "LOCK" position. Turn ignition switch to "LOCK" position. Move column shifter to Neutral position and put a 1/4" gauge pin through holes in shift levers at base of steering column.
  3. Loosen slide swivel on First and Reverse rod and place in First and Reverse transmission shift lever. Hold tightly in place and tighten swivel adjusting bolt. Install second and third shift rod.
  4. Unlock steering wheel and remove gauge pin. Lubricate all rod and swivel connections.
scientia non olet · About Mike's Workshop Manuals